SMMT News

Just a ‘Minute Or Two’ to pass your MOT

02 April 2013 #SMMT News
  • PassMyMOT.co.uk launched
  • 5,545 UK car dealers unite to reduce MOT failure rate.
  • Simple checks could cut up to 1.5 million failures each year.
  • Two minute check could save motorists time and money.

A nationwide campaign to help motorists reduce MOT failures is launched today (Tuesday 2 April), backed by 5,545 manufacturer main dealers across the UK.

Research from the Society of Motor Manufacturers and Traders (SMMT) indicates that around 1.5 million MOT failures each year could be avoided if motorists notify the dealer of simple problems with the vehicle before the annual roadworthiness test is carried out. In the biggest campaign of its type, 5,545 manufacturer main dealers across the UK will be giving guidance to motorists on the simple pre-MOT visual checks they can carry out on their own car.

Taking just a ‘Minute Or Two’, the 10-step checklist takes vehicle owners through a series of quick-and-easy checks – from headlights and tyres to windscreen wipers and fluid levels. By forewarning the dealership of any required work in advance of the MOT, motorists can then give their vehicle the best chance of passing the test first time around. The full ‘Minute Or Two’ checklist can be viewed at www.passmymot.co.uk, where visitors can also use a Garage Finder tool to locate their nearest dealer.

Every carmaker in the UK is participating in the campaign – from Ford to Ferrari, Porsche to Peugeot – and technicians at manufacturer main dealerships will be ready and able to assist customers who might be unsure about carrying out the checks themselves.

“The message that we are keen to get across to motorists is that an MOT fail could very easily be avoided if a simple visual check is carried out beforehand,” explains Mike Baunton, SMMT Interim Chief Executive. “Technicians at manufacturer main dealerships across the UK are ready and willing to help vehicle owners carry out the visual inspection before the test, and to rectify any issues before conducting a  MOT.

“With the introduction of a number of new additions to the annual MOT test just last month, it is even more important for vehicle owners to understand the advantage that a few simple checks could make to the outcome of their test. Indeed we would encourage the simple checks to be conducted regularly between MOT tests to ensure the vehicle is safe.”

Sue Robinson, National Franchised Dealer Association Director, added, “The ‘Minute Or Two’ checks are easy and simple to perform and will save motorists time and aggravation when taking their vehicle for its annual MOT test. If consumers have any concerns about the state of their vehicle in the run-up to its MOT, they can call a manufacturer main dealer, whose fully trained technicians will be able to provide advice on carrying out the checks for all makes and models.”

The ‘Minute Or Two’ checklist

1.         Headlights and indicators

Check that all of your car’s lights function properly – headlights, sidelights, rear lights, hazard lights and indicators.

2.         Brake lights

Press the brake pedal and ask a friend to check that the rear brake lights come on – including any supplementary brake strip light. Alternatively, carefully reverse up to a reflective surface (window, wall or garage door) and look behind to see for yourself.

3.         Number plate

Make sure that the number plate is clean and legible – even a quick wipe with a cloth can make a difference. The font and spacing of letters must also comply with legal requirements to be passed by the MOT station.

4.         Wheels and tyres

Check that wheels and tyres are undamaged. The minimum legal tyre tread depth is 1.6mm and any tyres with less than this will be marked as an MOT ‘fail’ (though it’s recommended that tyres are changed when tread reaches 3mm). If you’re in doubt about how much tread is left on a tyre, your local manufacturer main dealer can check for you. The dealer can also advise on the type of tyre that is right for your car if a replacement is required.

5.         Seats and seatbelts

The driver’s seat should adjust forwards and backwards and all seatbelts should be in good, working order. Test movement of the seat and inspect the seatbelt’s full length for damage. Tug sharply on all seatbelts to check that they react as they’re supposed to if you have to brake severely.

6.         Windscreen

Check the view out of the front of the car for damage – any damage larger than 40mm will cause a ‘fail’, as will any damage wider than 10mm in the ‘swept’ area of the windscreen in front of the driver.

 

7.         Windscreen wipers

Make sure your wipers are able to keep your windscreen clean – any tears or holes in the wiper rubber can be an MOT fail.

8.         Screenwash

Top up the washer bottle before taking the car in for a test – something as simple as an empty container can cause an MOT fail.

9.         Horn

Give a short blast of the horn – if it doesn’t work, your dealer will need to repair or replace it.

10.        Fuel and engine oil

Make sure your car is filled with enough fuel and engine oil – you can be turned away from the MOT without suitable levels of either, both of which are required by the dealership when running the car to test its emissions levels. If you are unsure about the type of oil that should be used, ask your manufacturer main dealer.

Note: When checking fluid levels and handling parts that could be become hot to the touch (eg bulbs), it is safest to ensure that the vehicle has had an opportunity to cool down fully.

Watch for your guide to the Minute Or Two check

Filter News

Update Newsletter